| 品牌 |
Z.T 零误差 |
| 型号 |
0700 "狂野 "T型刃战术折刀 |
| 产地 |
美国 |
| 全长 |
20.6 cm |
| 闭合长度 |
11.9 cm |
| 刀刃长 |
8.8 cm |
| 刀刃钢材 |
S30V |
| 钢材硬度 |
59-60 HRC |
| 刀刃厚度 |
3.07 mm |
| 手柄材质 |
黑色G10防滑手柄 配双钢衬 |
| 表面处理 |
石洗处理 |
| 重量 |
119 克 |
| 设计者 |
Ken Onion design |
| 类型 |
Tanto 型刀刃 |
| 锁定方式 |
Tri-mount 线锁 |
Named AN EXTRA-WIDE TANTO
A tanto is all about piercing power. And it stands to reason, if you need to pierce something, it's likely to be something pretty tough. This is the knife designed to handle that task.
Because more metal supports the point of the 0700’s extra-wide tanto blade, its piercing point is extra strong—even for a tanto. What’s more, the S30V premium steel blade is .121 in. (.307 cm) thick. That thicker blade stock, combined with the premium strength of S30V steel, just reinforces our point; that the 0700 is one tough tanto. A little more on the S30V steel; it was specifically formulated by Crucible as a high-performance knife steel. It is an advanced powdered steel, which means its grain structure is very fine and very even. That translates to an ability to be sharpened to a razor edge—which ZT does—and to hold that edge for a very long time. S30V provides an outstanding balance between its edge holding capability, wear resistance, and stain resistance.
The 0700 is a manual knife, but easily opens one-handed with the ambidextrous flipper blade protrusion or thumbstud. While the 0700 is a substantial knife, lightweight G-10 handles make it easier to carry, too.
ZT是 "Zero Tolerance" 的缩写，意为「零误差」。這個品牌名称诉求产品在设计方面、制造过程与功能应用方面，都达到「零誤差、零缺失」的完美境界。
此款0700“狂野”折刀，采用S30V钢制作，这种钢材具有极好的硬度和韧性，并且耐腐蚀。采用宽大的Tanto型刀刃设计，具有更好的穿刺力，表面采用石洗处理，耐刮蹭；手柄采用人体工程学设计的弯形手柄，当把刀完全握在手里的时候 你会发现他会完全贴合手掌；G10防滑贴片提供良好的握持感；采用一体线锁设计，易于开启和闭合；采用特殊设计的开刀钮，更符合实际使用；总之，此款的所有细节都为您想到了，正因为如此，此款0700折刀深受美国广大军警人员的喜爱。
xnife1980
