| 品 牌 |
Zero Tolerance 零误差 |
| 型 号 |
0560BW "ZT-Hinderer BlackWashed" ZT0560黑色石洗特别版 |
| 产 地 |
美国 |
| 全 长 |
22.4 cm |
| 闭合长度 |
12.7 cm |
| 刃 长 |
9.5 cm |
| 刀刃钢材 |
ELMAX |
| 钢材硬度 |
60-61 HRC |
| 刃 厚 |
4.8 mm |
| 手柄材质 |
3-D machined G-10 front, 3-D machined titanium back with blackwashed finish
正面3D立体雕刻G10纹路手柄；
背面3D立体雕刻防滑纹路钛金属手柄。 |
| 表面处理 |
Black washed finish 黑色石洗处理 |
| 重 量 |
5.8oz 约合164.42克 |
| 设计者 |
Hinderer design |
| 官网售价 |
325美元，不包括运费及关税 |
| 锁定方式 |
Ti frame lock |
The ZT-Hinderer 0560BW：
Now the ZT-Hinderer 0560 comes in our great-looking blackwashed finish. Like a battle-tested tool or a favorite pair of well-worn jeans, the blackwashed 0560BW has that already-broken-in look. To make a blackwashed knife, knife components are Tungsten DLC (Diamond-like Carbon) coated, then tumbled to produce the distinctive ZT blackwash finish.
The 0560BW retains its ELMAX® powdered steel for the extreme edge retention, high strength, and toughness a hard-use knife demands. High wear resistance in a steel usually means low corrosion resistance, but not with ELMAX. With this advanced steel, you get both properties—which makes it an excellent blade steel. The ELMAX blade rolls out of the handle on the KVT ball-bearing system. Just use the built-in flipper to open the knife quickly and easily.
The handle is basic black 3-D machined G-10 on the front, and lightweight, strong 3-D machined titanium on the back. The titanium frame lock, with lockbar stabilizer, ensures a rock-solid lockup every time. To ensure this big knife carries comfortably, ZT has machined pockets in the titanium handle. And to top it all off, the 0560BW is equipped with ZT's deep-carry pocketclip and Quad-mount system for tip-up, tip-down, left- or right-handed carry. .
ZT是 "Zero Tolerance" 的缩写，意为「零误差」。這個品牌名称诉求产品在设计方面、制造过程与功能应用方面，都达到「零誤差、零缺失」的完美境界
。
此款0560BW是ZT零误差公司与美国著名战术刀具设计师Hinderer合作生产的款式，由著名的原型刀 XM18演变而来。 此款主刀采用ELMAX粉末钢，具有很高的硬度和韧性；刀身表面
采用独特的黑色石洗处理，更漂亮也更耐用；主轴部位采用经典KVT 轴承系统，开启，闭合更为顺滑，也更耐磨损；手柄部位，正面采用3D立体雕刻G10，背面采用3D立体雕刻的钛金属手柄制作。配有可拆卸和移动的口袋夹。
xnife1980