| 品牌 |
TOPS 尖端战术 |
| 型号 |
# PPP-01
“TOPS Pry-Probe-Punch Tool” |
| 产地 |
美国 |
| 全长 |
18.415 cm |
| 撬棍宽度 |
3.175 cm |
| 握柄厚度 |
1.27 cm |
| 刀刃钢材 |
5140 Alloy RC 55-56 Forged Steel 5140合金锻造钢 |
| 钢材硬度 |
55-56 HRC |
| 刀刃处理 |
耐腐蚀涂层 |
| 手柄材质 |
外覆盖尼龙伞绳 |
| 其他 |
附带一个十字/一字改锥 和一个木锯 |
| 重量 |
170 克 |
| 刀鞘材质 |
尼龙 |
| 其他 |
|
| 可选款式 |
|
| 包装规格 |
塑料袋 |
PLEASE NOTE... THIS VERY EFFECTIVE TOOL IS NOT MADE TO LOOK PRETTY, THE FINISH IS VERY ROUGH AS ARE THE EDGES BECAUSE IT IS FORGED...IT IS A WORKING TOOL AND ACTS AS SUCH...
IT IS TRULY STRONG WITH A 1/2" CENTER BAR AND DOES ITS JOB WELL...
INCLUDED IS A MULTI-USE SURVIVAL SAW AND OFFSET SCREWDRIVER...JUST IN CASE.
...IT IS A HARD CORE SOB...
PPP-01 "PRY PROBE PUNCH TOOL" IMPORTANT NOTES...READ BEFORE USING
THE PPP--01 IS DESIGNED TO BE A MULTI PURPOSE EMERGENCY TOOL
AS SUCH, IT WILL BE A GOOD COMBINATION TOOL FOR PRYING, PROBING AND AS A PUNCH.
IN REALITY TO ACCOMODATE EACH INDIVIDUAL PURPOSE (FROM A METALURGICAL STAND POINT),
THE METAL CANNOT BE TOO HARD, TO BE USED EFFECTIVELY AS A SMALL STRONG PRYBAR,
INVERSELY, IF IT IS TOO SOFT IT WILL NOT PUNCH TEMPERED GLASS EFFECTIVELY,
KEEPING THESE REQUIREMENTS IN MIND, THE PPP IS DESIGNED TO HANDLE ALL THE TASKS
IN AN EMERGENCY SITUATION.
REPEATED USE OF THE PUNCH ON TEMPERED GLASS, MAY SLIGHTLY DULL THE POINT.
THIS TIP CAN BE EASILY RESTORED/TOUCHED UP WITH A METAL FILE, TO RESTORES ITS EFFECTIVENESS.
THIS TOOL....JUST LIKE A KNIFE, WILL REQUIRE OCCASSIONAL MINOR MAINTENANCE.
THE PRIMARY PURPOSE OF THE TOOL IS FOR EMERGENCY USEAGE.
WITH THANKS,
INCLUDES: 1- SURVIVAL SAW & 1- OFFSET SCREWDRIVER CLOSE QUARTER WORK
美国TOPS公司生产的一款重型求生工具。该款工具由5140合金锻造钢制造而成，即生产的时候，是由几十吨甚至上百吨的压力装置，利用重力下落产生的力量，瞬间将一整块钢材切割下来而成，这种方法的好处在于不经过切割，不会产生热量，所以不会影响钢材的强度和热处理。合金锻造钢通常用在防盗锁的制作上，具有极高的韧性和硬度；用此种钢材制造的工具，性能可想而知，非常之强大。 该工具一头具有破窗锥功能，前部有橡胶圈作为减震；手柄有尼龙绳缠绕，使用时轻轻 一击即可瞬间击碎汽车玻璃甚至是更厚的钢化玻璃；手柄另外一头是撬棍功能。100%美国制造。品质保证！
：
xnife1980