| 品 牌 |
Spyderco 蜘蛛 |
| 型 号 |
C79PSOR ASSIST™ FRN ORANGE “助攻手”全齿多功能救援折刀 |
| 钢 材 |
VG-10 |
| 闭合长度 |
124 mm |
| 全 长 |
213 mm |
| 刃 长 |
94mm |
| 切割刃长度 |
81mm |
| 刃 厚 |
3 mm |
| 手柄材质 |
橙色FRN 玻璃尼龙增强纤维 |
| 重 量 |
113 g |
| 闭合方式 |
背锁 |
| 蜘蛛圆孔 |
14mm |
| 硬 度 |
58-60HRC |
| 产 地 |
MADE IN SEKI CITY,JAPAN 日本 |
| 官网价格 |
172美元，不含运费及关税。 |
| 特 点 |
手柄内部藏有破窗器以及求生口哨。 |
简介：
Spyderco Assist Black Blade
We named this knife after its principal job function, to assist. The Spyderco Assist Black Blade is a lightweight folder for emergency fire/rescue professionals and the well-equipped citizen who rely on knives to be straightforward in use and perform flawlessly. The blade is coated in non-reflective black carbon nitride with a patented lift-and-pry (blunt-nose) shape made from high-carbon VG-10 stainless steel and loaded with teeth. Most if its’ 3-3/8” (86mm) cutting edge is serrated with the last inch at the tip left PlainEdged.
Above the one-hand-open hole sits a feature called a Cobra Hood. It’s a metal cap that guides the thumb over the hole for quick, by-feel opening then doubles as a textured leveraging platform for your thumb during cutting. A wavy pattern cut out of the top of the blade and again along the handle is for controlled rope cutting. By placing a rope in the groove (between the partially open blade and handle) you can squeeze the blade shut, slicing and trimming rope in a controlled movement without fully exposing the cutting edge.
The handle is black lightweight fiberglass reinforced nylon (FRN) with a survival whistle built into the butt end, shrill and high-pitched enough to get you noticed. A reinforced wire pocket clip attaches through the handle on either side for left- or right-hand use. A retractable and replaceable carbide-tip glass/ice breaker is housed inside the handle and is exposed when the closed blade is squeezed into the handle, retracting when pressure is released.
The VG-10 patented blunt-tipped blade is a toothy eighty-percent SpyderEdged for aggressively cutting seatbelts and fibrous material. The last inch of the tip we've left PlainEdge for detailed cutting (think sharpening pencils). Perched above the Round Hole, a Cobra Hood™ positions the thumb directly over the hole for quick blade deployment, then doubles as a leveraging platform for the thumb. The wavy pattern cut from the top of the blade (created by a fireman from Sweden) and along the inside of the handle let you place a piece of rope (between the half-open blade and handle) and scissor the blade shut- especially convenient for cutting rope in-and-around flesh without having to fully open/expose the knife's blade. The FRN handle is a molded wonder of Bi-Directional Texture™ contours and bulges that ergonomically wrap around your palm. In the closed position, squeeze the blade deeper into the handle and a retractable carbide tip protrudes out from the base for breaking glass. Outlined in safety orange on the handle's spine is a shrill and attention-pitched survival whistle. Carries left/right handed, tip-up by means of a tension wire clip.
这款蜘蛛助手 C79是一款轻量级折刀，为那些消防和救生人员所设计的，当然，您也可以用它。这款刀主要功能包括切割，救生口哨，和破窗器。 刀刃部分采用VG10钢材制作，具有极好的硬度和保持性，主刀采用蜘蛛全齿+少量平刃组合，齿刃可以锋利的割断绳索，或者是被困者的衣物等，方便脱离危险；刀刃上除了设计有蜘蛛标志性的圆孔外，在圆孔上方，还设计有一个大型的推刀盘，这是为了方便戴手套，或者是在黑暗中，也可以准确摸到开刀孔的位置，从而迅速打开。 刀刃背部设计成波浪形，是为了与手掌部位贴合，因为这款刀在手柄底部，隐藏设计有一个破窗器，而开启破窗器功能，是需要将刀具闭合，然后握住，破窗器才会从手柄中伸出来。 同时，在手柄侧面，设计有一个求生口哨，方便与外界取得联系！ 是一款非常优秀的求生工具！
xnife1980
