| 品牌 |
FALLKNIVEN |
| 型号 |
S1Z “The Forest Knife ” |
| 产地 |
瑞典 |
| 全长 |
24.7 cm |
| 刀刃类型 |
直刀 |
| 刀刃长 |
13 cm |
| 刀刃钢材 |
LAM VG-10 三层复合夹钢 |
| 钢材硬度 |
58-60 HRC |
| 表面处理 |
缎面处理 |
| 手柄材质 |
黑色热塑性弹性橡胶体,防滑 |
| 刀刃厚度 |
5mm |
| 重量 |
190克 |
| 设计者 |
FALLKNIVEN ，CO |
| 类型 |
生存刀 |
| 可选款式 |
ZYTEL硬鞘 |
| |
|
S1 The Forest Knife is probably the best hunting and fishing knife ever made. Its sturdy blade made of the new extremely strong stainless laminate VG10 custom steel is convex grounded for extra strong cutting power with no risk for edge breakage. The modified clippoint design works well for penetrating purposes, the long curved edge is ideal for skinning. The blade is long enough for lighter chopping and won´t break, it´s full 5 mm (0.2") thick!
Would you prefer to get no reflection from the blade, we offer a black CeraCoat 8H version.
The checkered handle gives a good grip even when your hands are cold or wet. Depending on your needs, you have the possibility to chose from two kinds of sheaths, an open-top dangler in thick, black leather or a zytel sheath with snappers around the handle.
Like all our models, the S1 Forest Knife is well tested before release, you will find no teething problems. If your looking for total quality, a classic knife from Fallkniven AB, is never wrong. Try the S1 Forest Knife, you won´t be disappointed!
FALLKNIVEN S1是继A1后出的“森林用刀”，S1刀刃比A1短一英寸，手柄也更小些。5英寸刃长的刀刃，因为它们够大，可以做到很多折刀做不了的工作。有抛光或特氟龙涂层款式供选，可以选配皮革鞘或战术子托鞘鞘。
FALLKNIVEN S1笔直的设计使它具有非常卓越的可控性，刀刃设计适合各种狩猎和捕鱼工作的条件；而刀锋特殊的打磨方式又使S1砍起来非常容易，且极度强劲。手柄把握牢固舒适，即使在潮湿或寒冷的环境中也不易脱手。经过全面淬水处理的VG-10赋予S1优秀的抗磨损能力。虽然重量限制令S1不是很适合劈砍工作，但其刀刃长度却适合切削木头。
S1也有全黑款式，表面加有特氟龙涂层，削减反光。同时，黑色特氟龙涂层可以保护刀刃不被腐蚀。如果用途是在海水等盐碱度较高的环境，我们建议选择全黑款式。
：实拍图片较多，加载时可能由于网络等原因，部分图片无法显示，或者显示为红叉，这时您只要将鼠标右键放在不能显示的图片处或者红叉处，单机右键，然后选择 显示图片 即可正常显示！）
xnife1980
