品 牌 |
BENCHMADE 蝴蝶 (官网地址:www.benchmade.com) www.xnife.net 双刃行 |
型 号 |
# 85 " Billet Ti Bali-Song® " “蝴蝶颂歌”85 甩刀 全实心钛金属手柄 CPM S30V钢
|
产 地 |
MADE IN USA 美国制造 |
全 长 |
25.4 cm xnife.net 双刃行 唯一官网 |
硬度 |
58-60HRC |
刀身钢材 |
CPM S30V steel |
刃 长 |
11.18 cm xnife.net 双刃行唯一官网 |
刃 厚 |
3.15 mm xnife.net 双刃行唯一官网 |
表面处理 |
Stonewashed 石洗处理唯一官网 |
手 柄 |
Sandblasted, single-piece billet titanium Handle 表面喷砂处理实心钛金属整体切割而成 |
手柄厚度 |
11.7 mm xnife.net 双刃行唯一官网 |
重量 |
149.97 克 xnife.net 双刃行唯一官网 |
刀鞘材质 |
黑色尼龙 |
适合范围 |
EDC |
官网价格 |
MSRP: 650 美元,不包含运费及关税 xnife.net 双刃行唯一官网 |
限 制 |
未成年人请勿购买任何商品! xnife.net 双刃行唯一官网 |

Designed with purpose and built to last, the Billet Ti Bali-Song® sets a high bar for durability and performance matched only by our promise that it will be yours, for life.Back to Benchmade’s roots, the 85 is their latest addition to the Balisong line up. Featuring integral single-piece titanium handle assembly, a magnetic latch, and a drop-point blade with through-hole milled fuller to match the aesthetics of the handles, this Balisong flips effortlessly on stainless steel ball bearings. The 85 is the confluence of heritage and the modern era.
Laser-cut from sheets of high-grade steel, every Benchmade blade is ground, beveled, and finished with uncompromising precision. We mill and machine handles in-house to the most exacting specifications, and every knife is hand-assembled and sharpened by highly trained technicians bringing to bear over thirty years of manufacturing excellence in our state-of-the-art factory in Oregon City, Oregon.
Proper care and regular maintenance help make your Benchmade knife yours, for life. Here are some tips for keeping your Benchmade in peak condition:
• All steel, regardless of price and grade, can eventually rust, so it’s important to keep your knife dry and lubricated. If spotting or rust occurs, semi-chrome metal polish will often take care of it.
• Dishwashers can cause serious damage that is not covered under our warranty, so make sure to hand-wash your Benchmade under warm water with dish soap only, and dry thoroughly.
• Remember, knives are cutting tools, and you should never use your knife as a pry-bar, screwdriver, chisel, or punch, unless the knife is designed explicitly for those purposes.
• If you choose to sharpen your blade yourself, avoid grinding wheels and other high-powered machinery.
• Handle, pivot, and pocket clip screws may require occasional adjustment using T6 & T10 Torx drivers. We recommend applying a small dab of releasable thread-locker as needed.
Made in USA.


此款钛金属蝴蝶可以追溯到Benchmade的起源,Balimade系列的最新成员是85。 这款Balisong配备一体式钛合金手柄组件,磁性闩锁和带通孔铣削的水滴形刃,可充分满足手柄的美学要求,可轻松翻转不锈钢滚珠轴承。 85是传承与现代的融合。