| 品 牌 |
Extrema Ratio 极端武力（意大利） |
| 型 号 |
RAO II BLACK “ RAO”第二代重型生存折刀 改良版水滴形
|
| 产 地 |
意大利 |
| 全 长 |
26.3 cm |
| 刃 长 |
11.9 cm |
| 钢 材 |
BöHLER N690 STEEL (58HRC) |
| 钢材硬度 |
58 HRC |
| 表面处理 |
MIL-C-13924 BURNISHING 北约军规标准涂层 |
| 刃 厚 |
6 mm |
| 手柄材质 |
ANTICORODAL ANODIZED ALUMINUM 阳极氧化航空铝合金手柄 |
| 闭合长度 |
14.4 cm |
| 重量 |
322 克 |
| 锁定方式 |
强化轴锁，配一个钢制保险螺栓。 |
| 官网价格 |
359欧元，不含运费及关税。 |
限制：未成年人请勿购买！本物品仅供收藏！
In June 2006, the “185° Rgt. Ricognizione e Acquisizione Obiettivi” (Target Acquisition Regiment) airborne “FOLGORE” (185° RAO) entrusted to Extrema Ratio the development of a unique knife fitting the unit’s specific operational duties. This resulted in the RAO: not an oversized folder as much as a compact survival & field knife, with a heavy and dependable blade. Its very reliable locking system, assisted by an extra safety device, effectively turns this folder into a fixed blade knife. The opening and closing is to be performed with both hands in order to minimize the risk of self-inflicted injuries, as the blade, because of its weight, is a veritable guillotine. The extra safe device is a steel pin to be hand-screwed through two holes by the guard section of the massive Anticorodal aluminum handle – its presence between blade and hand also acting as a great psychological boon. The sheath is an essential part of this weapon system: it holds a diamond-plate sharpener and enables user to carry the knife either in open position, held in place by a cord and two clips, or closed, inside the front pocket. The sheath can be attached to tactical vests or common belts, being MOLLE system-compliant. Available versions: RAO BLACK, RAO BLACK RUVIDO, RAO DESERT WARFARE.
在2006年6月成立的代号 185特种空降侦查团到极端武力公司，商讨是否可以为他们研发一款满足 尺寸不是很大的，便于携带，具有非常坚固刀身，重量级刀片，和坚固锁定的一款求生刀，它可以通过简单的固定装置将锁定装置锁死，从而成为一款可以比拟直刀的折刀。随后，极端武力公司根据这些要求开发出了此款 RAO系列折刀，并以 RAO来命名。 此款包括黑色刀身和沙色刀身两款。 主刀采用N690不锈钢制造，硬度保持在58HRC（此种钢材性能最佳的硬度），刀身表面有ER公司专利的激光涂层技术，激光处理的沙漠色纹理美观实用；高达6毫米的刀身厚度，坚固耐用；此刀特别设计为需要双手配合才能开启，以防止在使用中比如跳伞空降时意外刮到降落伞，意外打开发生危险。黄铜色阳极氧化处理的航空铝合金材质手柄，轻量，坚固；采用类轴锁锁定，而且特别在手柄前端设计有一个锁止圆孔，通过手柄末端自带的钢制螺栓，旋转到圆孔里，达到阻止刀身意外闭合的情况发生，因为是纯机械结构，不论是闭合，还是打开，完全不用担心意外解锁带来的风险。随刀附带一个具有MOLLEY功能的高级尼龙收纳套，可以外挂在腰带上，或者战术背心上，同时，随刀套附带一个原厂钻石磨刀器，以供任何时候都可以将刀打磨锋利，保持最佳性能！
xnife1980
