品  牌	ZERO TOLERANCE    零误差 （官网地址：www.ztknives.com ）
型  号	# 0055
产  地	MADE IN  USA   美国制造
全  长	22.2 cm
闭合长度	12.7 cm
刃  长	9.5 cm
钢材型号	CPM S35VN  粉末钢
钢材硬度	59~60 HRC
刃 厚	3.96 mm
表面处理	stonewashed finish。  石洗处理
手柄材质	Titanium frame lock, hardened steel lockbar insert     钛金属材质。
重量	141.7 克
锁定方式	克里斯·里夫专利 一体框架锁
其他特点	KVT轴承主轴；锁定替换系统；左右互换口袋夹；
官网价格	275美元，不含运费及关税
限 制	未成年人请勿购买任何商品，本品仅供收藏！

 






0055：

    The Zero Tolerance 0055 is unlike anything you’ve ever seen—unless you’ve seen the exciting Airborne folder by Gus T. Cecchini of GTC Knives. And while the Airborne was where we started, the ZT–GTC collaboration took off from there.

The result is the new 0055, which offers dramatic aerodynamic lines on both blade and handle and ZT’s meticulous precision build. The dynamic blade is CPM S35VN stainless steel, a formula that provides enhanced toughness and resistance to edge chipping with no loss of wear resistance. It is rich in niobium, vanadium, and chromium carbides and ensures the 0055 has a sharp, long-lasting edge.

The handles are 3D-machined titanium with a titanium frame lock and hardened steel lockbar insert. The custom backspacer is anodized aluminum in bright sky blue.

And yes, the 0055 features Gus' SLT hidden flipper tab. While the knife is closed, the flipper is concealed. When you’re ready to open it, pull back on the SLT. A spring flips the tab up into position. Then just pull back on the tab and the 0055 opens just like any other ZT. The hidden SLT ensures there’s no flipper tab poking up along the spine or beneath the handle to interrupt the sleek lines of the 0055. The 0055’s blade glides out of the handle on ZT’s KVT ball-bearing system, ready for use. The action is similar to a two-stage rifle trigger and is completely addicting.

To complete this exemplary knife, we added a left/right reversible bent titanium clip.

TECHNICAL SPECIFICATIONS 
技术参数：

Made in the USA

Lanyard hole

SLT spring-loaded tab

KVT ball-bearing opening system

Titanium frame lock, hardened steel lockbar insert

Reversible titanium clip (left/right, tip-up)

Steel: CPM S35VN, stonewashed finish

Handle: Titanium, bead-blasted finish

Blade Length: 3.75 in. (9.5 cm)

Blade Thickness: 0.156 in. (0.396 cm)

Closed Length: 5 in. (12.7 cm)

Overall Length: 8.75 in. (22.2 cm)

Weight: 5 oz. (141.7 g)

 

 

 



 

CPM S35VN 粉末钢介绍：

Crucible's S35VN modifies the formula of S30V for enhanced toughness and resistance to edge chipping with no loss of wear resistance. Its formula promotes the formation of niobium carbides along with the vanadium and chromium carbides. It provides a sharper, longer lasting edge.

CPM S35VN 由世界著名的钢铁公司克虏伯公司研发。它是基于S30V的基础上，增加了铌钒元素、铬元素等，使得钢材增加了韧性及刀锋的边缘保持性；S35VN钢材可以将刀锋研磨的更锋利，保持性更好！

 

  这款ZT 零误差 0055不同于任何你见过的ZT，除非你看到了激动人心的这款采用Gus T. Cecchini的GTC折刀。当空降是我们开始的时候，ZT-GTC合作从那里起飞了。

结果是新的0055，这提供了戏剧性的空气动力学线在刀片和手柄和ZT的精心打造。动态刀片是CPM S35VN不锈钢，它提供了增强的韧性和抗刃磨能力，不损失耐磨性。它富含铌、钒和碳化铬，并确保0055具有锋利的、持久的边缘。

手柄是三维加工钛与钛框架锁和硬化钢锁杆插入。定制背靠背是阳极氧化铝在明亮的天空蓝色。

是的，这0055个特点是格斯的SLT隐藏翻转标签。当刀关闭时，鳍状物被隐藏起来。当你准备打开它的时候，拉回到SLT上。弹簧将标签翻转到位。然后拉回到标签上，0055打开就像任何其他ZT。隐藏的SLT确保没有鳍状物标签沿脊柱或手柄下方，以打断0055的光滑线条。0055叶片从ZT的KVT滚珠轴承系统的手柄上滑落，准备使用。这个动作类似于两阶段步枪触发器，很过瘾。

ZT公司简介：
     ZT是 "Zero Tolerance" 的缩写，意为「零误差」。這個品牌名称诉求产品在设计方面、制造过程与功能应用方面，都达到「零誤差、零缺失」的完美境界。由于有着手工版的做工品质，ZT一经问世，便很快在刀具界异军突起。

从1974年起，美国的启刀厂致力于研发生产具创新性的刀具产品，旗下两个品牌“克肖”，“旬（顺）”主攻不同的产品线，都获得市场好评。从2006年起启公司创造第三个新品牌──ZT的（零容忍）。

ZT的是“零容忍”的简写，中文可翻译成“零误差”。这个品牌名称诉求产品在设计方面，制造过程与功能应用方面，都达到“零误差，零缺失”的完美境界。为实现这个目标启公司请出当家刀匠肯Onlion为代表，与斯特赖德刀刀厂进行合作，设计生产ZT的系列产品。

ZT的系列不仅拥有坚强研制背景，该品牌还参与社会公益事业。部份型号款式ZT的系列刀具的贩售，将捐赠部份收入给美国伤残退伍军人协会（聚乙烯醇，美国瘫痪退伍军人），该协会对于促进并推广退伍或现役军人的身心安全不遗余力。因此和ZT系列获得2006年的刀片杂志的发行人奖（出版商奖）。

 

 

 

················································································································································································

 

SLT SYSTEM  （SLT开启系统介绍）

• Flipper tab is hidden
• Gives knife a streamlined look
• SLT stands for Spring-Loaded Tab

‐ Read Less

With SLT, the flipper tab virtually disappears. There’s no big, conspicuous flipper tab on the back of the knife when it’s closed. There’s no big flipper tab below the blade when it’s open. Instead, there is a tiny tab at the front of the knife and nothing interrupts the knife's smooth. Yet it opens just like other ZT manual flippers—fast, easy, and one-handed.

The SLT (Spring-Loaded Tab) is an innovation of custom knifemaker Gus Cecchini. The flipper tab is concealed between the handle scales of the knife, held in place with a torsion spring. To open the
knife, the user pulls back on the concealed tab, overcoming the resistance in the spring. The tab then contacts the blade and as the user continues pulling back on the now-open flipper, the blade’s detent is overcome and it moves out of the handle, ready for use.

Working with Gus, the ZT engineering team added their own special sauce to the SLT, with a custom torsion spring and ball bearings that make SLT super smooth, super quick, and even more habit
forming for your flipper finger. You’ll find the advanced SLT system on the 0055. Look for it by what you don’t see: a flipper tab.

·················

• 

1. 1
2. 2
3. 3
4. 4
5.  

分享到：QQ空间新浪微博腾讯微博人人网微信

FOX 狐狸（意大利）#FX 250/23CR TRADITIONAL “STILETTO” real cow horn 23cm经典意大利黑手党侧跳 420C不锈钢制造 抛光处理+天然白牛角手柄（）

￥700