品   牌	SPYDERCO 蜘蛛
型   号	C101GPS2  " MANIX2 combo edge   "
刀刃钢材	CPM S30V
全长	204  mm
闭合长度	118 mm
刃   长	86 mm
切割刃长度	74 mm
刃   厚	3 mm
手柄材质	黑色G-10，内附加厚双钢衬
重   量	147 g
闭合方式	Ball Bearing Lock   蜘蛛专利 球锁系统
开启方式	蜘蛛14毫米圆孔
硬   度	60~61 HRC
产   地	Made in USA   美国，科罗拉多制造
表面处理	消光处理
官网售价	157.95美元，不包含运费及关税

 

Spyderco Mainx2 ：

     A recipe for folding knife success: Start with hard-use rated lock. Add a blade made of exotic high carbon steel. Manufacture it in Golden, Colorado using precise tolerances then add a healthy dash of American innovation. These ingredients are the Manix2, a concoction of solo features when combined make one of the strongest knives from Spyderco to date.

Patented by Spyderco, the Manix2 has a Ball Bearing Lock. It's a hardened free-floating ball bearing contained in a custom hi-tech polymer cage. The round ball bearing allows the lock to self adjust across a large surface, smoothly and consistently locking-up with solid confidence. Evolving over time, the Ball Bearing Lock's strength withstands hard work with a secure, versatile and comfortable grip. Ergonomics are peerless in this design. The blade is Crucible CPM S30V and flat-ground with aggressive thumb serrations (jimping) above a super sized 14mm Spyderco Round Hole. The Jimping doesn't stop there. With full steel liners the scales have jimping that extends beyond the G-10 handle scales scalloping areas of the handle's perimeter. This one is not slipping out of your hand and works well with gloves on! The liners pull double purpose by adding rigidly and lightweight strength to the handle. A three-screw clip is left/right-hand carry, positioned for comfort and deep pocket carry. The knife also has a large lanyard pipe to protect various types of cords or thongs.

 


 

    这款C101GPBBK2是全面升级之后的第二代马尼克斯系列。

Spyderco认为，一把成功的折刀，必须有下列条件组成：第一要有最坚固的锁定;  第二使用最顶级的高碳钢制造刀刃; 第三，在美国科罗拉多州Spyderco本部，以最严格的标准来生产。马尼克斯二代折刀，就具备了上述三要素。

马尼克斯2代折刀与前一代，外观设计上有多处不同：

1。原先的背卡榫，进化成Spyderco专利“钢珠轴承卡榫（球轴承锁）”。利用弹簧与钢珠来卡住刀刃，稳定度高，解锁可单手操作。 

2。刀刃改用154CM不锈钢制造，凹磨（空心地面）型态开锋。 

3。拇指孔加大到直径1.4公分，更容易操作。 

4。握摒内衬钢片有多处锯齿，辅助防滑，既使戴手套也不担心操作性的问题。 

5。尾部新增一个直径0.6公分穿绳孔，可自行配搭手绳。 

6。旧款黑色背夹，改成亮面不锈钢背夹。

分享到：QQ空间新浪微博腾讯微博人人网微信