品牌	SPYDERCO 蜘蛛
型号	C28SBK2  "DRAGONFLY2 SpyderEdge" 小蜻蜓二代 蜘蛛全齿 折刀
刀刃钢材	VG-10
全长	141 mm
闭合长度	84 mm
刀刃长度	57 mm
切割刃长度	48 mm
刀刃厚度	2.5 mm
手柄材质	FRN，玻璃尼龙纤维材质
重 量	34 g
闭合方式	背锁
开启方式	蜘蛛圆孔
硬度	58-60 HRC
产地	Made in  JAPAN   日本 制造
表面处理	缎面处理
官网售价	89.95美元，不包含运费及关税

 

Spyderco Dragonfly2：

     C.Q.I.-Constant Quality Improvement is a process Spyderco uses to evaluate and refine longstanding established knife models.  Sometime C.Q.I. changes are large and noticeable, sometimes they're smaller refinements.  Recently we applied C.Q.I. to the classic Dragonfly creating a new Dragonfly2.  The Dragonfly2 upgrades some notable features over the classic while keeping the important basics.  

Features carrying-over to the new version are the tried and tested mid-sized blade and ergonomic handle along with a front-finger choil and spine cusp.  Also staying is the blade-to-handle geometry and leveraging points which make the Dragonfly cut and feel like a much larger large knife when in the hand.  

New refinements include: the addition of a left/right tip-up wire clip, patented Bi-Directional Texturing' on the handle, choil and spine jimping and screw together handle construction.  The blade is still premium VG-10, now in a high-performance flat-grind with a PlainEdge or SpyderEdge.  

The position of the enlarged Spyderco Round Opening Hole in relation to the pivot leads to smooth opening and the FRN (fiberglass reinforce nylon) handle fits the hand ergonomically  with a series of grip angles and leveraging spots.

 

 

    这款C28SBK2是蜘蛛最畅销的型号 “小蜻蜓”的二代改进版，相比一代，做了如下改进，刀刃部分做了两侧对称的假刃处理，看起来更协调；主轴改为螺丝结构，而非铆钉；刀刃开刃采用大平磨方式，更锋利；手柄纹路采用上下凸起型，而非老款火山坑型；可双向调整的口袋夹。 大小适中的尺寸，更适合日用。

： （由于本站实拍图片较多，加载时可能由于网络等原因，部分图片无法显示，或者显示为红叉，这时您只要将鼠标右键放在不能显示的图片处或者红叉处，单机右键，然后选择 显示图片 即可正常显示！）

分享到：QQ空间新浪微博腾讯微博人人网微信