| 品 牌 |
SPYDERCO 蜘蛛 |
| 型 号 |
#LGRE3 "LADYBUG3 ZDP-189" ZDP189钢 小瓢虫 |
| 产 地 |
SEKI CITY,JAPAN 日本制造 |
| 全长 |
111mm |
| 闭合长度 |
62mm |
| 刀刃长 |
49mm |
| 刀刃钢材 |
ZDP-189 |
| 钢材硬度 |
60-62 HRC |
| 切割刃长度 |
49mm |
| 手柄材质 |
英国经典绿色FRN（玻璃尼龙纤维） |
| 刀刃厚度 |
2mm |
| 重量 |
15克 |
| LOCK |
背锁 |
| 类型 |
EDC |
| 可选款式 |
平刃，全齿，共两款可选！ |
| 官网价格 |
69.95美元 不含运费及关税。 |
Spyderco Ladybug3 ZDP-189 with British Racing Green handle：
Ladybugs have been on Spyderco's best-selling list for years. They are clip-less, designed for carrying on a keychain or with a thong or lanyard threaded through a hole at the handle's end.
ZDP-189 is Japanese-manufactured stainless blade steel that has recently gained acclaim in the knife industry as one of the hardest, highest performing blade steels available on the market today.
Using powdered metallurgy technology, 3% of ZDP-189's structure is made of pure carbon, making the steel harder and enhancing edge retention capacity. ZDP-189 is categorized as an exotic, high-performance blade steel which Spyderco offers as an option on several best-selling lightweight everyday-carry folders including the Ladybug3.
The handle is British Racing Green FRN (fiberglass reinforced nylon), molded with Bi-Directional Texturing® for slip-resistance while cutting. The PlainEdge blade is flat-ground from the spine to the cutting edge, offering abundant cutting power in a small folder.
这款蜘蛛的“小瓢虫”LGRE3，采用日本日立公司研发的超高硬度钢材:ZDP189钢，此种钢材具有62以上的硬度，经过热处理之后，可以达到HRC67的超高硬度，是目前为止，最硬的量产钢材之一。 此款小瓢虫的手柄采用英国绿色FRN材质，主轴采用了可调紧螺丝设计，取消了以前的铆钉设计。小瓢虫是目前蜘蛛产品里，最小的一款，可以挂在钥匙链上，方便携带和日常使用。
：（由于本站实拍图片较多，加载时可能由于网络等原因，部分图片无法显示，或者显示为红叉，这时您只要将鼠标右键放在不能显示的图片处或者红叉处，单机右键，然后选择 显示图片 即可正常显示！）
xnife1980